Skip to main content
Siemens 6ES7155-6MU00-0CN0 — PLC Communication Modules

Siemens 6ES7155-6MU00-0CN0, ET200SP interface, shared device

MPN6ES7155-6MU00-0CN0
Active

Siemens ET200SP PROFINET interface module, 6ES7155-6MU00-0CN0, 2-port, shared device, ARP, UDP, IGMP, MRP, Modbus TCP, I2t 0.25 A²·s, LEDs.

$250.19 – $701.91Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

6ES7155-6MU00-0CN0 — Identification
ParameterValue
Configurable from STEP 7 TIA Portal versionvia IM155-6PN/2 HF in compatibility mode
Firmware versionV5.2
6ES7155-6MU00-0CN0 — Communication
ParameterValue
TCP/IP supportYes
I&M data supportYes; I&M0 to I&M3
Diagnostics functionYes
Isochronous modeNo
6ES7155-6MU00-0CN0 — Electrical
ParameterValue
Rated value (DC)24 V
Permissible range, upper limit (DC)28.8 V
Permissible range, lower limit (DC)19.2 V
Current consumption, max.700 mA
Power loss (typ.)2.4 W
Reverse polarity protectionYes
Short-circuit protectionYes
Isolation test voltage707 V DC (type test)
6ES7155-6MU00-0CN0 — Environmental
ParameterValue
Operating temperature, horizontal install, min.-30 °C; No condensation
Operating temperature, horizontal install, max.60 °C
Operating temperature, vertical install, max.50 °C
Operating temperature, vertical install, min.-30 °C; No condensation
6ES7155-6MU00-0CN0 — Mechanical
ParameterValue
Width50 mm
Height117 mm
Depth74 mm

Product details

What the protocol support means for commissioning

The 6ES7155-6MU00-0CN0: ARP, IGMP, and UDP are standard layer-2/3 services; MRP (Media Redundancy Protocol) adds ring redundancy for PROFINET networks without needing a separate redundancy module. The module also supports PROFIenergy for energy-saving idle states during pauses. For diagnostics, five LEDs (MS, NS, RUN, ERROR, MAINT) give immediate status at the module face without a laptop — MS/NS green/red for bus health, RUN green, ERROR red, MAINT yellow. The I²t rating of 0.25 A²·s indicates the thermal energy the module can withstand during a short-circuit event on its power feed — important for coordination when sizing upstream protective devices. The module itself draws from the backplane bus; the I²t figure applies to the auxiliary power path if used.

Frequently asked questions

Does this module support ARP?

Yes, ARP (Address Resolution Protocol) is listed as supported.

What is the I²t rating of the 6ES7155-6MU00-0CN0?

The I²t rating is 0.25 A²·s, representing the short-circuit energy withstand capability on the module's power path.

MPN
6ES7155-6MU00-0CN0