Skip to main content
Log in
Siemens 6ES7157-1AA00-0AB0 — PLC Communication Modules

Siemens 6ES7157-1AA00-0AB0 PROFIBUS DP Slave, IP65/67, 12 Mb

MPN6ES7157-1AA00-0AB0
Active

Siemens ET 200S, 6ES7157-1AA00-0AB0, PROFIBUS DP slave interface module, DPV0/DPV1, 12 Mbit/s, IP65/67, SIL 2, Cat. 3, 24 VDC.

$133.35Ref. price · indicative, final on quote
Siemens 6ES7157-1AA00-0AB0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

6ES7157-1AA00-0AB0 — Identification
ParameterValue
Configurable from STEP 7 TIA Portal versionSTEP 7 V13 SP1 or higher
Firmware versionV1.0.x
Hardware functional status (FS)FS02
6ES7157-1AA00-0AB0 — Communication
ParameterValue
Transmission rate, max.12 Mbit/s
I&M data supportYes; I&M0 to I&M3
Diagnostics functionYes
6ES7157-1AA00-0AB0 — Electrical
ParameterValue
Rated value (DC)24 V
Permissible range, upper limit (DC)28.8 V
Permissible range, lower limit (DC)20.4 V
Power loss (typ.)1.7 W
Reverse polarity protectionYes; against destruction
Isolation test voltage707 V DC (type test)
6ES7157-1AA00-0AB0 — Environmental
ParameterValue
Operating temperature, max.55 °C
Operating temperature, min.-30 °C
IP protection degreeIP65/67
6ES7157-1AA00-0AB0 — Mechanical
ParameterValue
Width45 mm
Height159 mm
Depth46 mm

Product details

The Siemens 6ES7157-1AA00-0AB0 is a PROFIBUS DP slave interface module for the ET 200S distributed I/O system. It mounts directly in the field without an additional enclosure, rated IP65/67.

Physical and environmental constraints

The module is 45 mm wide, 159 mm high, and 46 mm deep. Reverse polarity protection is included against destruction. Operates from -30 °C to 55 °C ambient, draws 50 mA from the 24 VDC supply, and dissipates 1.7 W typical. Isolation tested at 707 V DC. Two M12 B-coded ports (PROFIBUS) plus one M8 4-pin shielded ET-Connection. Diagnostic alarm and SYNC/FREEZE capabilities are available.

Frequently asked questions

Does this module support DPV1 communication?

Yes, both DPV0 and DPV1 are supported.

What is the maximum transmission rate?

Up to 12 Mbit/s over the PROFIBUS RS-485 line.

Can this module be mounted in a zone without a cabinet?

Yes, the enclosure is rated IP65/67, suitable for direct field mounting.

MPN
6ES7157-1AA00-0AB0