Fit and connectivity
The 6ES7193-6AM00-0AA0: This BusAdapter drops into an ET 200SP station as the physical interface for PROFINET over M12. Two M12 push-pull sockets, D-coded, accept standard or push-pull M12 connectors. The 20 mm width matches a single ET 200SP slice; depth of 59 mm keeps it flush with the module body. Horizontal installation permissible up to 60 °C, vertical installation up to 50 °C, lower end at -30 °C in both orientations. Altitude limit of 5 000 m with restrictions above 2 000 m per ET 200SP system manual.
Installation notes
The single PROFINET interface passes through both M12 ports via an internal switch. The module is bus-powered. Use D-coded M12 connectors for PROFINET cabling. Cu conductors length 100 m refers to the maximum PROFINET cable segment between ports per the specification. For installations above 2 000 m, consult the ET 200SP system manual for restrictions.