What it is and where it goes
The 6ES7194-2MH03-1AB0: This is a factory-assembled power cable for Siemens ET 200AL distributed I/O. One end carries an angled M8 male connector, the other an angled M8 socket — both 4-pin, pre-wired to a 0.3 m gray PE-PUR cable. It's meant for the 24 V DC supply connection to an ET 200AL station, and it comes ready to bolt on, no field wiring. Rated for a temperature range of -25 °C to 80 °C, so it handles the heat inside a cramped control panel or on a machine near running gear without derating. The IP65/67 rating means you can mount it in washdown zones or dusty environments — just make sure the mating connector is tightened.
Built for movement
The cable carrier rating is the real tell: 2 million bending cycles at a 51 mm radius, 5 m/s, 5 m/s² acceleration. That's not a stationary cable — it's meant for a drag chain on a robot or linear axis. The sheath is PE-PUR, halogen-free and silicone-free, so it won't offgas corrosive fumes if things get hot.