Siemens, LSPM 2, ASIC, PROFIBUS DP, 6ES7195-0BA31-0XA0, 12 Mbit/s, 5 V, MQFP 80.
| Parameter | Value |
|---|---|
| Transmission rate, max. | 12 Mbit/s |
| Parameter | Value |
|---|---|
| Rated value (DC) | 5 V |
| Parameter | Value |
|---|---|
| Operating temperature, max. | 75 °C |
| Operating temperature, min. | -40 °C |
| Parameter | Value |
|---|---|
| ASIC | LSPM 2 |
| Bus access | in ASIC |
| PROFIBUS DP | Yes |
| Power loss, max. | 0.35 W |
| ASIC housing size | 4 cm² |
| Scope of firmware | not necessary |
| Suitability for use | simlpe slave applications |
| Design of ASIC housing | MQFP, 80 Pin |
| Microprocessor, required | No |
| Delivery quantity in pieces | 4 950 |
| Automatic detection of transmission rate | Yes |
The Siemens 6ES7195-0BA31-0XA0 is the LSPM 2 ASIC implementing the PROFIBUS DP slave protocol. It handles complete bus access in hardware, supports automatic baud rate detection up to 12 Mbit/s, and requires no external microprocessor. Operates on a 5 V supply with 0.35 W maximum power loss. Rated for -40 to 75 °C ambient, housed in an 80‑pin MQFP with 4 cm² die area. Firmware scope is not necessary for operation; suitable for simple slave applications.
It uses the LSPM 2 ASIC.
75 °C.
No related articles