The 6ES7195-0BB00-0XA0: This is the Siemens SIMATIC DP ASIC SPM 2, a dedicated PROFIBUS DP slave controller in a PQFP 120-pin package (10 cm² housing). It handles the full DP slave protocol on-chip — no external microprocessor required, no firmware to develop — making it a direct path to adding PROFIBUS DP to a custom device or laboratory prototype. Rated at 12 Mbit/s maximum transmission rate with automatic baud rate detection. Powered from a single 5 V DC rail, dissipating up to 0.5 W. Suitable for simple slave applications; scope of firmware is not necessary.
6ES7195-0BB00-0XA0 Siemens ASIC SPM 2, 12 Mbit/s PROFIBUS DP
MPN6ES7195-0BB00-0XA0
Siemens SIMATIC DP, ASIC SPM 2 for PROFIBUS DP slave, max. 12 Mbit/s, 64 I/O, 5 V DC, 0.5 W, PQFP 120.
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026
Specifications
| Parameter | Value |
|---|---|
| Transmission rate, max. | 12 Mbit/s |
| Parameter | Value |
|---|---|
| Rated value (DC) | 5 V |
| Parameter | Value |
|---|---|
| Operating temperature, max. | 55 °C; Worst case with full load |
| Operating temperature, min. | -40 °C |
| Parameter | Value |
|---|---|
| ASIC | SPM 2 |
| Bus access | in ASIC |
| PROFIBUS DP | Yes |
| Power loss, max. | 0.5 W |
| ASIC housing size | 10 cm² |
| Scope of firmware | not necessary |
| Suitability for use | simlpe slave applications |
| Design of ASIC housing | PQFP, 120 Pin |
| Microprocessor, required | No |
| Delivery quantity in pieces | 5 |
| Automatic detection of transmission rate | Yes |
Product details
Frequently asked questions
What is the ASIC type in this part?
It is the SPM 2 ASIC, purpose-designed for PROFIBUS DP slave operation.
What is the maximum operating temperature?
Maximum is 55 °C worst case with full load; minimum is -40 °C.
MPN
6ES7195-0BB00-0XA0