The Siemens 6ES7195-0BB10-0XA0 is the ASIC SPM 2 for PROFIBUS DP slave applications, handling up to 12 Mbit/s and 64 I/O points without a required microprocessor. Rated from -40 °C to 55 °C worst case with full load, and draws 0.5 W from the 5 V DC supply. Automatic baud rate detection is built in, no firmware scope needed. Packaged in a 120-pin PQFP housing, supplied 24 pieces per tray for production runs.
Siemens 6ES7195-0BB10-0XA0 ASIC SPM 2 PROFIBUS DP, 12 Mbit/s
MPN6ES7195-0BB10-0XA0
Siemens SIMATIC DP, ASIC SPM 2 for PROFIBUS DP slave, 12 Mbit/s, 64 I/O, 24 pcs/tray.
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026
Specifications
| Parameter | Value |
|---|---|
| Transmission rate, max. | 12 Mbit/s |
| Parameter | Value |
|---|---|
| Rated value (DC) | 5 V |
| Parameter | Value |
|---|---|
| Operating temperature, max. | 55 °C; Worst case with full load |
| Operating temperature, min. | -40 °C; Worst case with full load |
| Parameter | Value |
|---|---|
| ASIC | SPM 2 |
| Bus access | in ASIC |
| PROFIBUS DP | Yes |
| Power loss, max. | 0.5 W |
| ASIC housing size | 10 cm² |
| Scope of firmware | not necessary |
| Suitability for use | simlpe slave applications |
| Design of ASIC housing | PQFP, 120 Pin |
| Microprocessor, required | No |
| Delivery quantity in pieces | 24 |
| Automatic detection of transmission rate | Yes |
Product details
Frequently asked questions
What ASIC is used on this part?
It uses the SPM 2 ASIC for PROFIBUS DP slave operation.
What is the maximum transmission rate?
Up to 12 Mbit/s, with automatic baud rate detection.
What is the operating temperature range?
-40 °C to 55 °C worst case with full load.
MPN
6ES7195-0BB10-0XA0