Siemens SIMATIC SPC3 ASIC, PROFIBUS-DP, 44-pin PQFP, 12 Mbit/s, 96 pieces per lot.
| Parameter | Value |
|---|---|
| Transmission rate, max. | 12 Mbit/s |
| Parameter | Value |
|---|---|
| Rated value (DC) | 5 V |
| Parameter | Value |
|---|---|
| Operating temperature, max. | 85 °C |
| Operating temperature, min. | -40 °C |
| Parameter | Value |
|---|---|
| ASIC | SPC3 |
| Bus access | in ASIC |
| PROFIBUS DP | Yes |
| Telegram memory | 1.5 kbyte |
| Power loss, max. | 0.5 W |
| ASIC housing size | 2 cm² |
| Scope of firmware | 4 to 24 KB |
| Suitability for use | Intelligent slave applications |
| Design of ASIC housing | PQFP, 44 Pin |
| Microprocessor, required | Yes |
| Delivery quantity in pieces | 96 |
| Automatic detection of transmission rate | Yes |
The Siemens 6ES7195-0BD11-0XA0 is an SPC3 ASIC that handles the PROFIBUS DP protocol on the bus. It runs up to 12 Mbit/s and stores 1.5 kbyte of telegram data in its internal memory. The ASIC requires an external microprocessor and draws max 0.5 W at 5 V DC. Housed in a 44-pin PQFP, it's designed for intelligent slave applications.
This component ships in multiples of 96 pieces.
The 6ES7195-0BD11-0XA0 uses the SPC3 ASIC for PROFIBUS DP.
Up to 12 Mbit/s, with automatic baud rate detection.
1.5 kbyte telegram memory.
-40 to 85 °C.
Ships in a delivery quantity of 96 pieces.
No related articles