Siemens S7-1200 signal module, 6ES7232-4HD32-0XB0, 4 analog outputs, current or voltage, 24 V DC, diagnostics and alarms, temperature range -40 to 70 °C.
| Parameter | Value |
|---|---|
| Number of analog outputs | 4; Current or voltage |
| Output range: -10 V to +10 V | Yes |
| Output range: 0 to 20 mA | Yes |
| Load resistance, current outputs, max. | 600 Ω |
| Load resistance, voltage outputs, min. | 1 000 Ω |
| Cable length, shielded, max. | 100 m; shielded, twisted pair |
| Parameter | Value |
|---|---|
| Resolution (incl. sign, with overrange), max. | 14 bit; Voltage: 14 bit; Current : 13 bit |
| Error, voltage output (rel. to output range) | 0.3 % |
| Error, current output (rel. to output range) | 0.3 % |
| Temperature error (rel. to output range) | 25 °C ±0.3%, to 55 °C ±0.6% total measurement range |
| Parameter | Value |
|---|---|
| Rated value (DC) | 24 V |
| Power loss (typ.) | 1.5 W |
| Parameter | Value |
|---|---|
| Supply voltage monitoring | Yes |
| Diagnostics function | Yes |
| Diagnostic interrupt/alarm | Yes |
| Wire-break detection (current outputs) | Yes |
| Short-circuit detection (voltage outputs) | Yes |
| Parameter | Value |
|---|---|
| Operating temperature, horizontal mounting, max. | 60 °C |
| Operating temperature, horizontal mounting, min. | -20 °C |
| Operating temperature, vertical mounting, max. | 50 °C |
| Operating temperature, vertical mounting, min. | -20 °C |
| Temperature, max. | 70 °C |
| Temperature, min. | -40 °C |
| Parameter | Value |
|---|---|
| Front connector required | Yes |
| Width | 45 mm |
| Height | 100 mm |
| Depth | 75 mm |
The 6ES7232-4HD32-0XB0: The analog outputs sink up to 600 Ω when configured for current and require a load of at least 1 kΩ in voltage mode. Common-mode voltage on the output pair must not exceed 12 V. For cable runs over 100 m, shielded twisted pair is required. The front connector (ordered separately) is needed for wiring.
This module is in active current production with a lifecycle status of 'current'. No end-of-life notice is on file.
It operates from -40 °C to 70 °C.
It holds cULus, CE, FM, KC, UL, CSA, Marine, and RCM approvals, suitable for global installations.
It operates on a 24 V DC backplane supply, drawing 45 mA typical with a power loss of 1.5 W.
It is an active, current-production part sourced through our Siemens channel. Submit an RFQ for current pricing and lead time.
No related articles