Siemens S7-300 analog input module, 6ES7331-1KF02-0AB0, supports Pt100 and Ni100 RTDs, resistance up to 600 ohms, voltage ranges including ±10 V and 0–10 V, current 0–20 mA and 4–20 mA. Width 40 mm, depth 117 mm, height 125 mm.
| Parameter | Value |
|---|---|
| Number of analog inputs | 8 |
| Current input range | Yes |
| Voltage input range | Yes |
| Resistance measuring ranges | Yes |
| RTD support (resistance thermometer) | Yes |
| Thermocouple support (types) | No |
| Input range: 0 to 20 mA | Yes |
| Input range: 4 to 20 mA | Yes |
| Input range: -10 to +10 V | Yes |
| Input range: -5 to +5 V | Yes |
| Input range: -80 to +80 mV | No |
| Input range: 0 to 600 Ohm | Yes |
| RTD type: Pt100 | Yes; Standard/climate |
| RTD type: Pt200 | No |
| Current measurement: 2-wire transducer | Yes; with external supply |
| Current measurement: 4-wire transducer | Yes |
| Input resistance (0 to 20 mA) | 100 Ω |
| Input resistance (4 to 20 mA) | 100 Ω |
| Input resistance (-10 to +10 V) | 100 kΩ |
| Permissible input voltage, max. (destruction limit) | 30 V; 12 V continuous, 30 V for max. 1 s |
| Permissible input current, max. (destruction limit) | 40 mA |
| Max. shielded signal cable length | 200 m; max. 50 m at 50 mV |
| Parameter | Value |
|---|---|
| Resolution (bit incl. sign), max. | 13 bit |
| Voltage measurement error (±) | 0.4 %; 0.4% (±5 V, 10 V, 1 to 5 V, 0 to 10 V); 0.3% (±50 mV, 500 mV, 1 V) |
| Current measurement error (±) | 0.3 %; ±20 mA, 0 to 20 mA, 4 to 20 mA |
| Interference voltage suppression (at interference frequency) | 50 / 60 Hz |
| Parameter | Value |
|---|---|
| Diagnostic alarm | No |
| Diagnostics function | No |
| Limit value alarm | No |
| Parameter | Value |
|---|---|
| Isolation: channels to backplane bus | Yes |
| Isolation: between channels | No |
| Isolation test voltage | 500 V DC |
| Parameter | Value |
|---|---|
| Power loss, typ. | 0.4 W |
| Parameter | Value |
|---|---|
| Required front connector | 40-pin |
| Width | 40 mm |
| Height | 125 mm |
| Depth | 117 mm |
| Weight, approx. | 250 g |
The 6ES7331-1KF02-0AB0: Supports Pt100 and Ni100 RTDs with standard/climate linearization, plus LG-Ni1000 and resistance measurements up to 600 ohms. Voltage inputs span -10 V to +10 V, 1 V to 5 V, and 0 to +10 V; current inputs handle 0 to 20 mA and 4 to 20 mA.
Width 40 mm, depth 117 mm, height 125 mm. These are standard S7-300 dimensions; the module mounts in any slot of the rack and routes wiring to the front connector.
Width 40 mm, depth 117 mm, height 125 mm.
No related articles