Skip to main content
Siemens 6ES7332-7ND01-0AB0

Siemens 6ES7332-7ND01-0AB0 Analog Output Module, 4 AO

MPN 6ES7332-7ND01-0AB0
End of Life

Siemens S7-300 SM 332, analog output module, 4 AO, U/I, 16-bit, isochronous mode, 20-pin front connector required, 24 V DC.

$360.68 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6ES7332-7ND01-0AB0 specifications
ParameterValue
Depth120 mm
Width40 mm
Height125 mm
Conversion time per channel0.8 ms; 0.8 ms (standard operation); 1.6 ms (isochronous mode)

Product details

Four outputs, every common signal type

The 6ES7332-7ND01-0AB0 is a four-channel analog output module for the S7-300 rack. It covers the full set of industrial signal ranges: 0 to 10 V, ±10 V, 1 to 5 V, 0 to 20 mA, 4 to 20 mA, and ±20 mA. The voltage outputs are short-circuit protected, and the current outputs drive loads up to 500 Ω. Resolution hits 16 bit on the ±10 V range, dropping to 15 bit for 0 to 10 V and ±20 mA, and 14 bit for the 1 to 5 V and 4 to 20 mA ranges.

What the specs mean on the line

Conversion time is 0.8 ms per channel in standard mode, 1.6 ms in isochronous mode — fast enough for most closed-loop control loops on a conveyor or packaging line. The module draws 100 mA from the 5 V backplane bus and up to 240 mA from the 24 V load supply. Diagnostic alarms are parameterizable, and the red SF group error LED gives a quick visual on the rack. Isolation between channels and between channels and backplane is tested at 500 V DC.

MPN
6ES7332-7ND01-0AB0