PROFIBUS DP master for S7-400 racks
The 6ES7467-5GJ02-0AB0 is a SIMATIC S7-400 IM467 PROFIBUS DP master interface (RS485) for connecting field devices per the PROFIBUS-DP standard. It's explicitly marked as a replacement part, so if you're swapping an older IM467 variant into an existing S7-400 rack, this is the drop-in. It handles up to 96 DP slaves at a transmission rate up to 12 Mbit/s, with a 9-pin sub D socket connection. The interface supports direct data exchange (slave-to-slave communication), which saves bus cycles for peer-to-peer data transfer between drives or remote I/O. Power draw from the backplane bus is 1 300 mA at 5 V DC, plus the 24 V DC supply. That's a significant chunk of the S7-400 power budget — verify your PS supply margin before adding other modules in the same rack.
Environmental range and mounting
Rated for operation from -40 °C to 70 °C, with max 95 % humidity at 26 °C. That covers unheated cabinets and outdoor-adjacent installs — no special climate control needed for most industrial floors. The 25 mm width (single slot) fits standard S7-400 racks; depth is 210 mm, height 290 mm.