Skip to main content
Log in
Siemens 6ES7522-1BP00-0AA0 — Digital Output Modules

Siemens 6ES7522-1BP00-0AA0 Digital Output Module, 24 V DC, 8

MPN6ES7522-1BP00-0AA0
Active

Siemens S7-1500 digital output module, 6ES7522-1BP00-0AA0, 16 channels, 24 V DC, 8 A total, 35 mm wide.

$571.00 – $962.18Ref. price · indicative, final on quote
Siemens 6ES7522-1BP00-0AA0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

6ES7522-1BP00-0AA0 — Outputs
ParameterValue
Digital outputs64
Output typeTransistor
6ES7522-1BP00-0AA0 — Electrical
ParameterValue
Rated value (DC)24 V
Output current, resistive load, max.100 Hz
Output current at signal "1" (rated)0.3 A
Output current, max. per circuit / per module0.3 A
Total output current per module, max.8 A
Permissible range, upper limit (DC)28.8 V
Permissible range, lower limit (DC)19.2 V
Output voltage at signal "1" (min.)L+ (-0.8 V)
Residual current at signal "0", max.0.5 mA
Output current up to 60 °C, max.8 A
Power dissipation (typ.)3.5 W
Inductive shutdown voltage clampL+ (-53 V)
Load resistance, upper limit10 kΩ
Load resistance, lower limit80 Ω
Isolation between channelsNo
Isolation between channels and backplane busYes
Isolation, channels in groups of16; 32 when using SIMATIC TOP connect connection module
Isolation test voltage707 V DC (type test)
6ES7522-1BP00-0AA0 — Protection & Diagnostics
ParameterValue
Short-circuit protectionYes
Reverse polarity protectionYes; through internal protection with 7 A per group
Diagnostics functionNo
Diagnostic alarmNo
Short-circuit detectionNo
Wire-break detectionNo
Redundant load controlYes
Output can drive a digital inputYes
6ES7522-1BP00-0AA0 — Performance
ParameterValue
Output switching delay 0 to 1, max.100 µs
Output switching delay 1 to 0, max.500 µs
Switching frequency, inductive load, max.0.5 Hz; According to IEC 60947-5-1, DC-13
Switching frequency, lamp load, max.10 Hz
6ES7522-1BP00-0AA0 — Environmental
ParameterValue
Operating temperature, horizontal mount, max.60 °C
Operating temperature, horizontal mount, min.-30 °C
6ES7522-1BP00-0AA0 — Mechanical & Connection
ParameterValue
Cable length, unshielded, max.600 m
Cable length, shielded, max.1 000 m
Width35 mm
Height147 mm
Depth129 mm
Weight (approx.)270 g

Product details

The 6ES7522-1BP00-0AA0: The 8 A total current limit at 60 °C is the module-wide budget, not per-channel. With 16 channels, each output is good for about 0.5 A continuous if evenly loaded; for heavier single loads, you'll need to parallel channels while staying under the module total. Signal "1" is guaranteed at L+ minus 0.8 V, keeping thresholds tight even on longer runs. Response times are 100 µs turn-on and 500 µs turn-off.

No-frills output module

No diagnostic alarm, no wire-break or short-circuit detection, no PWM or isochronous mode. The red ERROR and green RUN LEDs give basic status. Firmware is V1.0.0 and field-updatable. This module is for simple on/off loads (valves, contactors, indicators) where fault feedback is handled elsewhere.

Frequently asked questions

What does MSO = Yes mean?

MSO = Yes indicates the module supports Modular Slice Object, enabling unified data access in TIA Portal.

MPN
6ES7522-1BP00-0AA0