Skip to main content
Log in
Siemens 6ES7532-5NB00-0AB0 — Analog Output Modules

Siemens 6ES7532-5NB00-0AB0 Analog Output Module, MSO

MPN6ES7532-5NB00-0AB0
Active

Siemens S7-1500 analog output module, 6ES7532-5NB00-0AB0, MSO yes, supplied with 40-pole push-in front connectors, 24 V DC, 25 mm wide.

$194.31Ref. price · indicative, final on quote
Siemens 6ES7532-5NB00-0AB0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

6ES7532-5NB00-0AB0 — Outputs
ParameterValue
Number of analog outputs2
Output range: -10 V to +10 VYes
Output range: 0 to 10 VYes
Output range: 1 V to 5 VYes
Output range: 0 to 20 mAYes
Output range: 4 to 20 mAYes
Output range: -20 mA to +20 mAYes
Load resistance, current outputs, max.750 Ω
Load resistance, voltage outputs, min.1 kΩ; 0.5 kOhm at 1 to 5 V
Current output, no-load voltage, max.22 V
Voltage output, short-circuit current, max.24 mA
Voltage output, short-circuit protectionYes
Inductive load, current outputs, max.10 mH
Capacitive load, voltage outputs, max.1 µF
Cable length, shielded, max.800 m; for current, 200 m for voltage
6ES7532-5NB00-0AB0 — Performance
ParameterValue
Resolution (incl. sign, with overrange), max.16 bit
Error, voltage output (rel. to output range)0.2 %
Error, current output (rel. to output range)0.2 %
Temperature error (rel. to output range)0.002 %/K
Conversion time (per channel)0.5 ms
Settling time, resistive load1.5 ms
Settling time, inductive load2.5 ms
Settling time, capacitive load2.5 ms
6ES7532-5NB00-0AB0 — Power
ParameterValue
Rated value (DC)24 V
Permissible range, upper limit (DC)28.8 V
Permissible range, lower limit (DC)19.2 V
Power loss (typ.)2.7 W
Reverse polarity protectionYes
6ES7532-5NB00-0AB0 — Diagnostics
ParameterValue
Supply voltage monitoringYes
Diagnostics functionYes
Diagnostic interrupt/alarmYes
Wire-break detection (current outputs)Yes; Only for output type "current"
Short-circuit detection (voltage outputs)Yes; Only for output type "voltage"
6ES7532-5NB00-0AB0 — Isolation
ParameterValue
Isolation: channels to backplane busYes
Isolation: between channelsNo
Isolation: channels to load voltage L+Yes
Isolation test voltage707 V DC (type test)
6ES7532-5NB00-0AB0 — Environmental
ParameterValue
Operating temperature, horizontal mounting, max.60 °C
Operating temperature, horizontal mounting, min.-30 °C; from FS04
Operating temperature, vertical mounting, max.40 °C
Operating temperature, vertical mounting, min.-30 °C; from FS04
Installation altitude, max.5 000 m; Restrictions for installation altitudes > 2 000 m, see manual
6ES7532-5NB00-0AB0 — Mechanical
ParameterValue
Width25 mm
Height147 mm
Depth129 mm

Product details

The 6ES7532-5NB00-0AB0: It ships with 40-pole push-in front connectors, so there is no need to order them separately — they are included in the box. The module supports MSO (Mandatory Support Object) for PROFINET IO, and carries full diagnostics (diagnostic alarm, channel and module error LEDs) as well as a RUN LED for status at a glance. Typical power dissipation is 2.7 W, keeping the thermal load low in dense cabinets.

Output ranges and wiring limits

Maximum cable length is 800 m for current outputs, 200 m for voltage outputs — enough for most remote field devices. Wire-break detection is available on current outputs only; short-circuit detection on voltage outputs only.

Firmware version V1.0.0 is factory-loaded; HW functional status FS01. The module is isoline-tested at 707 V DC (type test). Supplied with connectors and ready to quote — submit an RFQ to confirm delivery timing for your quantity.

Frequently asked questions

What does MSO (Mandatory Support Object) mean on this module?

The module supports MSO, which is a PROFINET IO feature ensuring that the device's required data objects are always present in the controller's configuration, simplifying commissioning and diagnosis.

What is the depth of the 6ES7532-5NB00-0AB0?

The depth is 129 mm, typical for S7-1500 modules of this width class.

MPN
6ES7532-5NB00-0AB0