Siemens 6ES7556-1AA00-0AB0, SIMATIC S7-1500 technology module, dual 700 MHz LEON processors, GigE Vision interface, USB 3.1, SD card slot, 24 V DC, 3.3 W.
| Parameter | Value |
|---|---|
| Configurable from STEP 7 TIA Portal version | STEP 7 V16 or higher |
| Firmware version | V1.2 |
| Hardware functional status (FS) | FS03 |
| Parameter | Value |
|---|---|
| I&M data support | Yes; I&M0 to I&M3 |
| Diagnostics function | Yes |
| Parameter | Value |
|---|---|
| Rated value (DC) | 24 V |
| Permissible range, upper limit (DC) | 28.8 V |
| Permissible range, lower limit (DC) | 19.2 V |
| Current consumption, max. | 0.5 A |
| Power loss (typ.) | 3.3 W |
| Reverse polarity protection | Yes |
| Short-circuit protection | Yes |
| Isolation test voltage | 707 V DC between USB load voltage and backplane bus (type test); 1 500 V AC between Ethernet and functional ground (type test) |
| Parameter | Value |
|---|---|
| Input data area | 254 byte; +2 bytes QI and application-specific status bytes |
| Output data area | 254 byte; +2 bytes application-specific status bytes |
| Parameter | Value |
|---|---|
| Operating temperature, max. | 70 °C |
| Operating temperature, min. | -40 °C |
| Operating temperature, horizontal install, min. | 0 °C |
| Operating temperature, horizontal install, max. | 40 °C |
| Parameter | Value |
|---|---|
| Width | 35 mm |
| Height | 147 mm |
| Depth | 129 mm |
The 6ES7556-1AA00-0AB0: I²t rating of 0.17 A²·s affects the inrush current your 24 V DC supply must handle at power-up – use this value to size the supply's transient protection or to coordinate with a fuse. The module consumes 3.3 W typical, so a standard Class 2 supply is adequate for the module alone.
Mounts on 35 mm DIN rail horizontal; 147×35×129 mm. 24 V DC power; status LEDs RUN, ERROR, MAINT, LINK. I&M0–I&M3 asset tracking.
Yes, a USB 3.1 port is present on the front, suitable for firmware updates or connecting a USB device.
No related articles