Skip to main content
Siemens 6ES7922-3BD00-0BB0 — PLC Accessories

Siemens 6ES7922-3BD00-0BB0 Pre-assembled MTA Front Connector

MPN6ES7922-3BD00-0BB0

Siemens SIMATIC S7-300 PCS7 MTA pre-assembled front connector, 40-pole, 3 m round cable, screw-type enclosure terminal, rated 24 V / max 30 V.

$313.00Ref. price · indicative, final on quote
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

Identification

6ES7922-3BD00-0BB0 — Identification
ParameterValue
Product designationPre-assembled front connector MTA
Target systemSIMATIC S7-300 PCS7 MTA

Connection & Wiring

6ES7922-3BD00-0BB0 — Connection & Wiring
ParameterValue
Number of poles40; of the front connector
Conductor cross-section, rated0.5 mm²
Electrical connection type, on enclosureScrew-type terminal
Field-side connection typeConnector strip

Electrical

6ES7922-3BD00-0BB0 — Electrical
ParameterValue
Rated value24 V
Maximum30 V

I/O & Signal

6ES7922-3BD00-0BB0 — I/O & Signal
ParameterValue
Number of channels40
For PLC output cardNo
For PLC input cardYes
Analog signal transmissionYes
Digital signal transmissionNo

Mechanical

6ES7922-3BD00-0BB0 — Mechanical
ParameterValue
Cable length3 m
Cable designRound cable
Cable outer diameter7.6 mm; bundled single cores
Cable sheath materialPVC
Cable sheath colorBlack

Environmental

6ES7922-3BD00-0BB0 — Environmental
ParameterValue
Operating temperature range0 ... 60 °C
Storage temperature range-30 ... +70 °C

Product details

The Siemens 6ES7922-3BD00-0BB0 is a pre-assembled front connector MTA — a 40-pole cable assembly that bridges the SIMATIC S7-300 I/O module (via the 40-pole front connector 6ES7392-1AM00-0AA0) to a 25-pin D-SUB socket on an ET200M remote station. It is purpose-built for the PCS7 MTA (Marshalled Termination Assembly) architecture, where analog signals from the field terminate on a connector strip inside the enclosure and are routed as a bundled round cable to the PLC rack. The cable is 3 m long, black PVC-sheathed, with a 7.6 mm outer diameter over bundled single cores. Each conductor is 0.5 mm² (roughly 20 AWG), adequate for the 24 V signal levels the system runs — the rated value is 24 V, with a maximum of 30 V. That 30 V ceiling means this assembly is strictly for low-voltage control and analog signal wiring, not for power distribution. The field-side termination is a connector strip (the MTA marshalling panel); the enclosure side uses a screw-type terminal block on the D-SUB connector. This matches the standard S7-300 wiring practice: field wires land on the removable front connector, and the pre-assembled cable carries the signals to the remote I/O station.

Signal type and channel count

This cable is rated for analog signal transmission only — the evidence explicitly states no digital signal transmission. That is a critical distinction: if you are wiring discrete 24 V DC sensors or actuators, this assembly is the wrong pick. It is designed for 4-20 mA, thermocouple, RTD, or voltage analog inputs that need the twisted-pair integrity of a pre-assembled round cable. The 40 poles match the 40-channel front connector on the S7-300 analog input module. Each pole carries one signal conductor; the cable bundles all 40 cores in a single sheath, keeping the wiring tidy and reducing the chance of a loose terminal in a high-vibration panel.

Environmental limits and storage

Storage temperature range is -30 to +70 °C; operating range is 0 to 60 °C. The PVC jacket is rated for indoor use in controlled environments — not for washdown zones or outdoor cabinets without additional protection.

Frequently asked questions

What is the maximum voltage rating?

30 V maximum; the rated operating voltage is 24 V.

Does this cable support digital signals?

No — it is rated for analog signal transmission only. Digital signal transmission is explicitly excluded.

What is the cable length and conductor size?

3 m length, 0.5 mm² conductor cross-section, round PVC sheath with a 7.6 mm outer diameter.

Will 6ES7922-3BD00-0BB0 work with a standard S7-300 I/O module?

Yes, it mates with the 40-pole front connector 6ES7392-1AM00-0AA0 on the S7-300 and terminates on a 25-pin D-SUB socket for ET200M. It is specifically designed for the PCS7 MTA system.

MPN
6ES7922-3BD00-0BB0