Skip to main content
Log in
Siemens 6ES7922-3BJ00-0AS0 — PLC Accessories

Siemens 6ES7922-3BJ00-0AS0 Pre-assembled Front Connector MTA

MPN6ES7922-3BJ00-0AS0

Siemens SIMATIC S7-300 PCS7 MTA pre-assembled front connector cable, 40-pole, 8 m, round cable, screw-type terminal on enclosure, connector strip in field.

$207.01 – $470.00Ref. price · indicative, final on quote
Siemens 6ES7922-3BJ00-0AS0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

6ES7922-3BJ00-0AS0 — Identification
ParameterValue
Product designationPre-assembled front connector MTA
Target systemSIMATIC S7-300 PCS7 MTA
6ES7922-3BJ00-0AS0 — Connection & Wiring
ParameterValue
Number of poles40; of the front connector
Conductor cross-section, rated0.5 mm²
Electrical connection type, on enclosureScrew-type terminal
Field-side connection typeConnector strip
6ES7922-3BJ00-0AS0 — Electrical
ParameterValue
Rated value24 V
Maximum30 V
6ES7922-3BJ00-0AS0 — I/O & Signal
ParameterValue
Number of channels40
For PLC output cardYes
For PLC input cardYes
Analog signal transmissionYes
Digital signal transmissionYes
6ES7922-3BJ00-0AS0 — Mechanical
ParameterValue
Cable length8 m
Cable designRound cable
Cable outer diameter9.8 mm; bundled single cores
Cable sheath materialPVC
Cable sheath colorBlack
6ES7922-3BJ00-0AS0 — Environmental
ParameterValue
Operating temperature range0 ... 60 °C
Storage temperature range-30 ... +70 °C

Product details

What this pre-assembled cable does for an S7-300 rack

The Siemens 6ES7922-3BJ00-0AS0 is a pre-assembled front connector MTA cable that bridges a 40-pole front connector on a SIMATIC S7-300 I/O module to a 50-pole D-sub socket on an ET 200M distributed I/O station. It carries both analog and digital signals, so one cable handles mixed I/O types without separate wiring runs.

8 m round cable, 40 poles, screw terminals

Length is 8 m — enough to reach from a panel-mounted S7-300 rack to a remote ET 200M node without a junction box. The cable is round, black PVC sheath, 9.8 mm outer diameter, with 0.5 mm² conductors. On the enclosure side it terminates in a screw-type terminal block; in the field it connects via a connector strip. Rated at 24 V nominal, maximum 30 V, so it stays within the SELV limits typical for S7-300 I/O backplanes.

Frequently asked questions

What is the exact length of Siemens 6ES7922-3BJ00-0AS0 cable?

The cable is 8 m long. That is the fixed pre-assembled length — no field trimming, no extension couplers needed for a typical panel-to-remote-I/O run.

Is 6ES7922-3BJ00-0AS0 compatible with ET 200M distributed I/O?

Yes. The cable is designed for the SIMATIC S7-300 PCS7 MTA target system and terminates in a 50-pole D-sub socket that mates directly with ET 200M interface modules. It handles both analog and digital signal transmission.

How can I order the Siemens 6ES7922-3BJ00-0AS0 pre-assembled front connector cable?

This part is in mature production and is quoted to order against your BOM quantity.

MPN
6ES7922-3BJ00-0AS0