Skip to main content
Log in
Siemens 6ES7922-5BC50-0HB0 — PLC Accessories

Siemens 6ES7922-5BC50-0HB0 S7-1500 Front Connector, 40-pole,

MPN6ES7922-5BC50-0HB0
Active

Siemens SIMATIC S7-1500, front connector, 40-pole screw-type, 20 single cores 0.5 mm² H05Z-K, 2.5 m cable, rated 24 V / max 30 V.

$210.00Ref. price · indicative, final on quote
Siemens 6ES7922-5BC50-0HB0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

6ES7922-5BC50-0HB0 — Identification
ParameterValue
Product designationFront connector with single cores
Target systemSIMATIC S7-1500
Suitability / intended useDigital I/O modules
6ES7922-5BC50-0HB0 — Connection & Wiring
ParameterValue
Number of poles40; of the front connector
Connector type6ES7592-1AM00-0XB0
Conductor cross-section, rated0.5 mm²
Connecting terminal typeScrew-type terminal
Electrical connection type, on enclosureScrew-type terminal
Field-side connection typeother
Core markingNumber consecutively from 1 to 20 in white adapter contact = core number
6ES7922-5BC50-0HB0 — Electrical
ParameterValue
Rated value24 V
Maximum30 V
6ES7922-5BC50-0HB0 — I/O & Signal
ParameterValue
Number of channels20
For PLC output cardYes
For PLC input cardYes
Analog signal transmissionNo
Digital signal transmissionYes
6ES7922-5BC50-0HB0 — Mechanical
ParameterValue
Cable length2.5 m
Cable designH05Z-K
Cable outer diameter2.2 mm; bundled single cores
Cable sheath materialPolyolefin basis halogen-free
Cable sheath colorblue
RAL color numberRAL 5010
6ES7922-5BC50-0HB0 — Environmental
ParameterValue
Operating temperature range0 ... 60 °C
Storage temperature range-15 ... +60 °C

Product details

What this front connector is for

The Siemens 6ES7922-5BC50-0HB0 is a pre-wired front connector for SIMATIC S7-1500 digital I/O modules. It mates with the 40-pole module interface (order code 6ES7592-1AM00-0XB0) and brings out 20 individual signal cores, each numbered 1 through 20 at the adapter end, to screw terminals on the enclosure side. Rated at 24 V with a maximum of 30 V, it handles the signal-level wiring typical of 24 VDC digital inputs and outputs in an S7-1500 rack.

Cable and termination specs

Each core is 0.5 mm² H05Z-K — a halogen-free, polyolefin-insulated single conductor, blue sheath, with an outer diameter of 2.2 mm per bundled core. The screw-type terminal on the enclosure side accepts the field wiring; the connector side plugs into the module. Cable length is 2.5 m, enough to reach a typical DIN-rail terminal block in the same cabinet without excess slack.

Listed as active in production. No obsolescence concern for current BOM lines.

Frequently asked questions

What voltage range does this front connector support?

Rated at 24 V, with a maximum of 30 V. This covers the standard 24 VDC I/O signal level used across S7-1500 digital modules.

Will this connector work with an S7-1500 analog module?

No. It is designed for digital I/O modules only; analog signal transmission is not supported.

What cable type is used on this connector?

H05Z-K single cores, 0.5 mm², halogen-free polyolefin sheath, blue. Suitable for panel wiring where low-smoke, halogen-free material is specified.

MPN
6ES7922-5BC50-0HB0