What this cable does on a migration
The 6ES7922-5BD00-0CE0 is a pre-assembled migration cable that connects an MTA AI8 redundant analog input module to an ET200SP HA AI 16xI 2-wire HART HA input assembly. It carries 8 conductors of AWG 26 over a 3-meter length, sized for the signal routing between the old I/O rack and the new distributed I/O drop.
Lifecycle and compliance posture
RoHS compliance is documented since 15-07-25. REACH Article 33 disclosure notes lead (CAS-No. 7439-92-1) above 0.1% w/w in the cable construction, which is typical for PVC-jacketed signal cables and triggers the duty-to-inform for EU installations. No UL or IEC certification numbers are listed on this cable variant.
What to watch when swapping in this cable
The 3-meter fixed length means you're routing between a cabinet-mounted MTA and a DIN-rail ET200SP HA station — not through a cable duct run. The 8 x AWG 26 conductors are pre-terminated; no field wiring or ferrule crimping needed. Verify the connector keying on both ends matches your MTA revision before pulling the old cable out. Packaging dimensions are 40 x 35 x 2 cm — the cable ships coiled, not on a reel. That 2 cm height means it fits standard bin storage without special racking.