The Siemens 6ES7922-5BJ00-0CD0 is a migration cable for the ET200SP HA distributed I/O system, specifically the DQ16 relay redundant module. It connects the 26-pin MTA (Mass Termination Assembly) connector on the module to field wiring, with a length of 8 m and AWG26 conductors. This cable is used when migrating from an existing system or extending the I/O rack to a remote junction box, maintaining signal integrity for 24 VDC digital outputs rated at 0.5 A per channel. The cable is part of the Ordering Data Overview product family and carries Group Code R315 and Product Group 9394, which are internal Siemens classification codes used for catalog structuring and cross-referencing within the SIMATIC range.
Integration notes
The cable is pre-terminated on the module side with a 26-pin MTA connector that mates directly to the DQ16 relay redundant module's front connector. The field end is unterminated (flying leads), allowing the installer to terminate to terminal blocks or connectors per the panel layout. The 8 m length provides flexibility for routing through cable trays or ducting to a remote marshalling cabinet. Packaging dimensions are 40 x 35 x 2 cm, so the cable is shipped coiled in a box. The single-piece packaging quantity means each order unit is one cable.