The Siemens 6ES7923-0BF00-0CB0 is a pre-assembled round cable that connects the front connector module to the connection module on SIMATIC S7-300 and S7-1500 systems. It's built for digital I/O modules — not for analog signal transmission — and uses IDC connectors at both ends, 16 poles each. That 5 m length covers most cabinet-to-field junction runs without a splice.
Rated at 24 V with a maximum of 60 V, this cable handles the standard 24 VDC digital I/O bus on S7-300/1500 racks. The 0.14 mm² conductor cross-section and 6.5 mm outer diameter PVC sheath are sized for the current draw of 8 digital channels — enough for a typical input or output module's field wiring. The 16 conductors map one-to-one to the 16-pole front connector, so no pinout adaptation is needed.
Deployment context
The round, unshielded PVC jacket is fine for digital signals in a clean electrical environment; for analog or noise-sensitive runs you'd need a shielded variant.