The 8-meter length covers typical cabinet-to-field-device runs in process automation layouts where the ET 200SP HA remote I/O rack sits a moderate distance from termination panels. The 0.56 mm² conductor cross-section (roughly 20 AWG) handles standard 24 VDC digital signals and 4-20 mA analog loops without excessive voltage drop over that distance. Bare ends with wire end sleeves (ferrules) mean the field side terminates directly into screw- or spring-clamp terminal blocks — no need for a second connector at the field end. The 20-channel labeling helps during commissioning trace each signal back to the D-sub pinout.
RoHS compliance is confirmed effective January 1, 2024, and REACH Article 33 information is available on request for downstream substance reporting.