Skip to main content
Siemens 6GT2701-5DA13 — RFID & Auto-ID

Siemens 6GT2701-5DA13 SIMATIC RTLS Anchor RTLS4030A, UWB/pha

MPN6GT2701-5DA13

Siemens SIMATIC RTLS Anchor RTLS4030A, UWB/phase, FCC, 6GT2701-5DA13, IP65, 30 m / 500 m range, 0.2 m typical accuracy.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

6GT2701-5DA13 — RF / Air interface
ParameterValue
Compatible transponders / systemsRTLS4000 with UWB, phase technology
6GT2701-5DA13 — Communication / Electrical
ParameterValue
Communication interfacesMESH Network
Voltage range (DC)8 ... 30 V
Rated value (DC)24 V
Status indicators (LEDs)Three LEDs
6GT2701-5DA13 — Mechanical
ParameterValue
Mounting / fastening method3 M4 screws
Width180 mm
Height48 mm
Depth180 mm
MaterialASA+PC
ColorTi gray
6GT2701-5DA13 — Environmental
ParameterValue
Degree of protection (IP)IP65
Operating temperature range-15 ... +50 °C
Storage temperature range-15 ... +50 °C
Transport temperature range-15 ... +50 °C
6GT2701-5DA13 — Approvals
ParameterValue
IECEx certifiedNo

Product details

The Siemens 6GT2701-5DA13 is a SIMATIC RTLS Anchor RTLS4030A — a fixed-position reference node for the RTLS4000 real-time locating system using UWB phase technology. It operates on two radio bands: 3.1 to 7 GHz and 2.4 to 2.48 GHz, with IEEE 802.15.4 UWB as its primary ranging protocol and a mesh network for backhaul communication. The anchor draws up to 0.3 A at 24 VDC nominal (8 to 30 VDC supply range accepted) via a Bulgin PX0412/03P 3-pin connector, with a single digital output.

The anchor is rated for two maximum ranges: 30 m and 500 m, both for open-air applications. The 30 m figure reflects the practical UWB ranging limit under typical industrial multipath conditions; the 500 m figure applies to the mesh backhaul link between anchors in line-of-sight. Typical localization accuracy is 0.2 m for the primary UWB range and 1 m for the secondary — meaning the system can resolve a tag's position to within 20 cm in a well-planned environment, which is sufficient for asset tracking and zone-based personnel safety in most manufacturing and logistics layouts.

The housing is IP65-rated (ASA+PC material, Ti gray), so the anchor withstands washdown and dust ingress — suitable for deployment on factory floors, warehouses, or outdoor logistics yards. Mounting is via 3 M4 screws; the accessory list includes a corner mount bracket and a ceiling suspension plate. Dimensions are 180 mm wide, 180 mm deep, and 48 mm tall. Operating, storage, and transport temperature range is -15 to +50 °C.

Frequently asked questions

What is the range of this RTLS anchor?

Two maximum range figures apply in open air: 30 m for UWB ranging and 500 m for the mesh backhaul link. Typical localization accuracy is 0.2 m for the primary UWB range and 1 m for the secondary.

What power supply does this anchor need?

It accepts 8 to 30 VDC, with a nominal rating of 24 VDC. Maximum current draw is 0.3 A at 24 V. Power is supplied through a Bulgin PX0412/03P 3-pin connector.

What is the environmental rating?

The housing is IP65-rated, made from ASA+PC in Ti gray. Operating temperature range is -15 to +50 °C.

MPN
6GT2701-5DA13