The Siemens 6GT2810-2AB01 is a SIMATIC RF630L SmartLabel Paper RFID tag, sized 4"x2" and wound 1000 units to a roll. It's built for the RF600 reader system and operates across the full 860 to 960 MHz UHF band, talking EPCglobal Class 1 Gen 2 and ISO 18000-6C protocol at up to 320 kbit/s. The Impinj Monza 2 chip gives you 96 bits of EPC memory plus 12 bytes of user-rewritable storage, with lock, unlock, kill, write-protect, and password features. Out here in the grease, this label is meant for one-time apply-and-forget asset tracking on paper or cardboard surfaces — it's a one-side adhesive job. The read range tops out at 8 m, but that's reader-dependent; the system manual (support.automation.siemens.com) covers the overrange caveats. It'll handle temperatures from -40 to +65 °C during read/write access, and can sit outside the read area up to +80 °C for 200 cycles.
The IP60 rating means the label body is dust-tight, but the adhesive side and the paper substrate need protection from humidity — it's not a washdown tag. If your line sees steam cleaning or chemical spray, this isn't the one; you'd want a hard-cased RFID tag. The 860-960 MHz band covers UHF readers globally (Europe, US, Asia), so it's a single SKU for multi-region deployment. Storage life is 2 years max at 40-60% humidity; store it cool (15-25 °C) or the EEPROM retention could drift.