The 6GT2810-2AE82-0AX1 is a SIMATIC RF630L SmartLabel — a white PET UHF RFID tag built around the NXP Ucode 8 chip, operating from 860 to 930 MHz and compliant with EPCglobal Class 1 Gen 2 and ISO 18000-63. It's designed for the Siemens RF600 system, so it pairs directly with RF600 readers and antennas in a logistics or production tracking setup. The tag measures 90 mm wide by 30 mm deep and is only 0.2 mm thick — a low-profile label that adheres to plastic surfaces via one-side adhesive. When properly adhered, it achieves IP67 protection, meaning the tag body and antenna survive washdown and dust exposure on the line.
Read range, memory, and environmental limits
Maximum read range is 5 m, but the actual distance depends on the reader and antenna configuration — the system manual notes overrange is possible with certain RF600 readers. The tag uses linear polarization, so antenna alignment matters for consistent reads in a conveyor or portal setup. Memory is EPC-only: 128 bits (16 bytes) with no user memory. The chip supports lock, unlock, kill, write protection, and password protection — useful for preventing data tampering after commissioning. Transfer rate reaches 320 kbit/s, and the tag is multitag-capable, so it handles bulk reads in a dense tag field. Operating temperature during read/write is -25 to +85 °C. Outside the read/write area — meaning the tag can survive higher heat when not being interrogated — the range extends to -25 to +160 °C. Storage temperature is tighter at 5 to 25 °C, and the manufacturer specifies a maximum storage life of 2 years. No backup battery is present; it's a passive tag powered by the reader field.
Printing and packaging
The label is printable via thermal transfer process, so you can encode variable data like serial numbers or barcodes onto the PET surface before application. It ships in rolls of 7000 labels with a 6-inch (152.4 mm) core, one roll per carton. The minimum order quantity is 7000 units.