Spare-part module for SINAMICS drive lines
The Siemens 6SL3120-1TE23-0AB0 is a SINAMICS Single Motor Module designated as a spare part. It takes a 600 V DC input from a common DC bus and delivers 400 V 3 AC output rated at 30 A, with internal air cooling. The module ships with the DRIVE-CLiQ cable included. Rated for a 30 A continuous motor load at 400 V three-phase, this module fits Booksize or Chassis drive systems where a single-axis power stage is needed. The 600 V DC bus input means it connects to a regulated DC supply from a Line Module, not directly to the AC mains.
The 30 A output at 400 V 3 AC is the continuous rated current for a motor load. That governs the maximum motor power you can drive: roughly 15–18 kW for a standard 4-pole induction motor, depending on duty cycle and ambient temperature. The 600 V DC input rail voltage is standard for SINAMICS S120 DC-link systems — verify your Line Module's DC output matches before wiring. Internal air cooling means the module draws ambient air through its heatsink. In a cabinet installation, ensure clearance around the module for airflow and that the cabinet's own cooling can handle the dissipated heat at full load. The DRIVE-CLiQ cable included simplifies connection to the Control Unit — no separate cable order needed.