The Siemens 6SL3162-8BG00-0AA0 is a SINAMICS S120 Terminal Kit for a Single Motor Module rated 45 A / 60 A C-type. This is the connector and cabling interface kit that terminates the power and signal wiring to the motor module — the piece you need when building or servicing an S120 drive cabinet, not the module itself.
Sourcing and compliance
RoHS compliant since 24-05-17, with REACH candidate-list disclosure available on request. Export control is AL: N / ECCN: N, meaning no special licensing for most destinations. Product class B carries a return restriction — Siemens requires the buyer to contact their Siemens partner or contact before initiating a return. This is standard for configured or serial-number-tracked drive components; factor it into your RMA process. Group Code R220 and Product Group 9617 are the Siemens internal classification codes. If your ERP or MRO system filters by these, they match the terminal kit line.
What it connects to
This terminal kit is sized for the SINAMICS S120 Single Motor Module in the 45 A / 60 A C-type frame. It provides the screw or spring-clamp terminals that accept the motor power cable, DC-link busbars, and the 24 V control wiring. If you are swapping a failed module or building a new cabinet, this kit is what lands the wires on the module's input side. The C-type designation refers to the module's form factor — check that your existing module or cabinet cutout matches the C-type footprint before ordering. The kit does not include the module itself.