The Siemens 6SL3200-6AE12-2BH0 is a G120P variable speed drive in frame size FSA, rated for 0.75 kW motor output at 400 VAC three-phase. It delivers 2.2 A continuous output current and can push the motor to 550 Hz — useful for high-speed spindle or centrifuge applications where standard 50/60 Hz motors won't cut it. The overload profile is 110 % for 57 seconds and 150 % for 3 seconds, repeating every 300 seconds. That's enough headroom for a pump starting against a closed valve or a conveyor restart under light load, but not for a crusher or extruder that needs 150 % for 60 seconds — those need a higher frame size. Built-in communication covers Modbus/RTU, RS485/USS, and BACnet MS/TP on the standard port. Optional PROFIBUS, PROFINET, and CANopen modules slot in if the line requires them. Four analog inputs and two analog outputs handle feedback from pressure transmitters or flow meters without an extra I/O block. Six digital inputs cover start/stop, speed presets, and fault reset. The IP20 enclosure means it's for a clean, dry panel — not washdown or outdoor duty.
Dimensions are 73 x 202 x 288 mm (W x H x D). Mounting is standard DIN rail or screw-mount via the integral lugs. Conformity marks include CE, UL, RCM, and EAC, so it clears regulatory gates for European, North American, Australian, and Eurasian markets. The drive is designed to EN 61800-3, the EMC standard for adjustable-speed power drive systems — meaning it's been tested for conducted and radiated emissions in its intended environment. Rated for 50/60 Hz line supply. The integrated Filter B class attenuates common-mode and differential-mode noise across the switching frequency range, keeping the drive from radiating interference back onto the line or into nearby sensitive equipment.
Lifecycle status is active per Siemens — this is a current-production catalog number, not a phase-out or NRND line. No last-time-buy window to chase.