The Siemens SINAMICS G120C 6SL3210-1KE13-2AB1 is a compact drive rated for 1.1 kW continuous power on 380-480 VAC three-phase, with a 150% overload capability for 3 seconds — enough to handle a tough breakaway load on a conveyor or pump without oversizing the drive. It ships with an integrated Class A EMC filter, so you can skip the external box on most industrial lines, and the Safe-Torque-Off (STO) is built in — no extra safety relay card needed for that function. The I/O complement — 6 digital inputs, 2 digital outputs, 1 analog input, 1 analog output — covers a basic speed/start-stop setup, and the onboard USS/MODBUS RTU fieldbus means you can talk to a PLC without a separate comms module.
The FSA frame size — 196 x 73 x 203 mm (HxWxD) — fits a standard 200 mm deep enclosure, and the IP20 / UL Open Type rating means it's fine in a clean indoor panel but not for washdown or outdoor duty. It needs an external 24 V supply for the control electronics; that's typical for this class, but worth flagging if your panel only carries 120 VAC control power.