The Siemens 6SL3210-1KE17-5AP0 is a SINAMICS G120C compact drive rated for 3.0 kW output power on a 380-480 VAC three-phase supply, with a 150% overload capability for 3 seconds. It integrates a Class A EMC filter, Safe Torque-Off (STO) function, and PROFIBUS DP fieldbus, all in an IP20 / UL Open Type FSA frame measuring 196 x 73 x 203 mm (HxWxD). The 150% overload for 3 seconds means this drive handles short-duration peak loads — like a conveyor starting under full belt load or a crusher clearing a jam — without tripping. The 3.0 kW rating at 380-480 VAC covers standard 4-pole induction motors in that power band, common on pumps, fans, and small conveyors. I/O complement is six digital inputs, two digital outputs, one analog input, and one analog output — enough for basic speed reference and status feedback without an expansion module. Safe Torque-Off is integrated, so no separate safety relay is needed for the stop function; it meets SIL 3 / PL e on its own.
Lifecycle and Sourcing
Sourcing posture: quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time. No immediate last-time-buy window is signaled by the mature status, but buyers with long-running BOMs should monitor for any future PCN.
Integration Notes
The FSA frame (196 x 73 x 203 mm) is the smallest in the G120C family — fits a 200 mm deep enclosure with room for wiring ducts. IP20 / UL Open Type means it is for indoor, clean panel environments only; no washdown or outdoor exposure. PROFIBUS DP is the integrated fieldbus. If your plant runs PROFINET or EtherNet/IP, this is not the right variant — the G120C family has separate order codes for those protocols. Verify the control network before specifying. The integrated Class A EMC filter meets EN 61800-3 for first environment (domestic) restricted distribution. In a typical industrial panel, no external filter is required for CE compliance, but a Class B filter would be needed for residential feed.