The 6SL3210-1KE24-4AF1: Rated 22.0 kW continuous with a 150% overload capability for 3 seconds — this is the short-term torque burst needed to break a stuck pump or accelerate a high-inertia conveyor without oversizing the drive frame. The 3AC 380-480 V +10/-20% input range covers standard European and North American industrial mains; the 47-63 Hz tolerance handles weak grid conditions or generator supply without tripping on frequency deviation.
I/O complement and safety channel
6 digital inputs, 2 digital outputs, 1 analog input, and 1 analog output — enough for basic speed/start/stop control plus one analog feedback loop without an expansion module. Safe Torque Off (STO) is integrated on the base unit, meeting SIL 3 / PL e for the safety circuit; no separate safety relay needed for the drive axis. PROFINET PN onboard — the drive slots directly into a PROFINET IRT network with cycle times down to 1 ms, suitable for coordinated motion on a packaging or material-handling line.
Panel fit and physical footprint
Size FSD: 472 x 200 x 237 mm (H x W x D) — the depth stays under 240 mm, so it fits a 300 mm deep enclosure with room for the incoming cable bend radius.
Compliance and substance declarations
RoHS compliant since 2017-02-13; REACH Article 33 notification applies because the product contains lead (CAS 7439-92-1) above 0.1% w/w in certain components — this is typical for power electronics solder joints and does not affect normal operation or disposal classification. Export Control Classification: AL: N / ECCN: 9N9999 — no special license required for most commercial shipments outside embargoed destinations.