The Siemens 6SL3210-1NE15-8UL0 is a SINAMICS G120 Power Module PM230 in the unfiltered variant, IP20 enclosure, FSA frame size. It runs on 380-480 V 3 AC at 47-63 Hz and delivers 2.2 kW under low overload — meaning 150% for 3 seconds, 110% for 57 seconds, and 100% for 240 seconds. Ambient temperature range is 0 to +40 °C. Dimensions are 196 x 73 x 165 mm (HxWxD). This module ships without a Control Unit or operating unit; it's released for CU240B/E-2 and CU230P-2 Control Units running firmware V4.4 or higher. Note: PM230 supports no safety functions.
Drive integration field note
FSA frame fits a standard DIN rail or panel-mount footprint — the 73 mm width leaves room alongside a line reactor or brake resistor in a 400 mm cabinet. The IP20 rating means it's for clean, dry indoor environments; no washdown or outdoor duty. Unfiltered variant means you'll need an external line filter if the installation must meet EN 61800-3 Category C2 or C3 conducted emissions limits — factor that into the panel layout. The module expects a Control Unit (CU240B/E-2 or CU230P-2) plugged directly onto its interface; no separate cabling between them. Firmware V4.4 or higher on the CU is required — check the CU's version sticker before mating.
What the overload ratings mean for the motor
The low-overload curve (2.2 kW at 150% for 3 s, 110% for 57 s, 100% for 240 s) is sized for constant-torque loads like conveyors or screw feeders that need short bursts of extra torque for starting or jams. The 150% / 3 s window handles breakaway torque; the 110% / 57 s covers prolonged acceleration. If your motor profile demands higher sustained overload (e.g., a centrifuge or crusher), step up to the high-overload rating of the same frame — but that would be a different order code. The 380-480 V range covers 400 V and 480 V nominal supplies common in European and North American industrial plants.