Power Module with Integrated Filter — What the Ratings Mean for Fit
The Siemens 6SL3210-1NE23-8AL1 is a SINAMICS G120 Power Module PM230 with an integrated Class A EMC filter, rated for 380–480 V three-phase AC input at 47–63 Hz. The low-overload rating delivers 18.5 kW at 150% for 3 seconds, 110% for 57 seconds, and 100% continuous over 240 seconds — that's the load cycle for pump, fan, or conveyor applications where peak demand is brief and the thermal time constant of the motor allows recovery. The IP20 enclosure means it's for panel-mount only; no washdown tolerance, so keep it inside a cabinet with at least the minimum clearance for airflow.
Where It Fits in the Panel
Mounts on a backplate with four screws — no DIN-rail clip. The 140 mm width leaves room alongside a line reactor or output choke in a standard 600 mm wide enclosure. The integrated Class A filter covers conducted emissions for most industrial environments; if your site has sensitive instrumentation on the same supply, verify the filter attenuation against the noise floor of your sensors.