The Siemens 6SL3210-5FB10-2UF1 is a SINAMICS V90 servo drive rated for 0.2 kW motor output, fed from 200-240 V 1/3-phase AC input. It delivers 1.4 A at the motor terminals, with output frequency adjustable from 0 to 330 Hz. The PROFINET interface on this unit means it talks directly to a Siemens S7-1200 or S7-1500 controller without an extra gateway — useful for a compact motion axis on a packaging or assembly line.
What the ratings mean for fit
The 1.4 A output current is the continuous rating at the motor; it drives a 0.2 kW synchronous servo motor. The input side pulls 3.0 A on single-phase or 1.8 A on three-phase supply — a real difference if you're wiring a 230 V single-phase line and need to size the branch circuit protection accordingly. The 200-240 V AC input range with -15%/+10% tolerance means it holds regulation down to 170 V and up to 264 V, which covers most European and North American low-voltage mains without a transformer. IP20 degree of protection means it's for a clean, dry cabinet — not washdown or outdoor. The Size A footprint (45x170x170 mm WxHxD) fits a standard 45 mm wide DIN-rail slot; plan for 170 mm of clearance above and below for airflow, since the drive relies on natural convection for cooling at this rating.
The 45-66 Hz input frequency acceptance covers 50 Hz and 60 Hz grids globally. The output frequency range of 0-330 Hz suits high-speed spindle applications or servo axes that need to spin a motor well above base speed. No integrated braking resistor at this frame size — plan an external resistor if the load has high inertia or requires rapid deceleration.