The Siemens 6SL3210-5HE11-5UF0 is a SINAMICS S210 servo drive rated for 200-480 V 3AC input at 6.0 A, delivering 5.0 A output to a 1.5 kW motor across 0-550 Hz. The wide input range covers 208 V and 480 V industrial supplies common in North America and Europe — no transformer needed for either. Output frequency up to 550 Hz suits high-speed spindle or servo applications beyond standard 50/60 Hz motor base speeds. Frame size B (70 x 322 x 223 mm) fits standard DIN-rail or backplate layouts; plan for adequate clearance above and below for airflow, as the drive relies on natural convection cooling at this rating.
Lifecycle stage is listed as mature, meaning the drive is in stable production with no active development or feature updates. This is typical for a well-established product line — supply is steady through authorized channels and the independent market, but do not expect firmware revisions or new option modules. The documentation carries a 30.12.2020 revision date with Änderungen vorbehalten (subject to change) notice, confirming the design is frozen.
Mount the drive in a clean, dry enclosure — IP20 means no protection against water ingress. The frame size B unit draws 6.0 A input at full load; size the branch circuit protection and supply wiring accordingly. Output to the motor is 5.0 A at 0-550 Hz; use shielded motor cables for EMC compliance, with the shield bonded at both ends per Siemens installation guidelines. Commissioning typically uses the SINAMICS Startdrive or SIZER tool for parameterization. The drive supports PROFINET as standard on the S210 series, so it integrates directly into a TIA Portal environment. No separate communication module is needed for PROFINET connectivity.