The Siemens 6SL3211-0AB11-2BA1 is a SINAMICS G110-CPM110 AC Drive marked as a spare part, sized for a 0.12 kW motor on a 200-240 V 1 AC supply with an integrated filter. Constant-torque (CT) and variable-torque (VT) ratings both land at 0.12 kW, with CT overload capability at 150% for 60 seconds — enough for short-duration starting torque on a small conveyor or pump. The 150 x 90 x 116 mm (HxWxD) IP20 enclosure fits inside a clean dry cabinet; no BOP (Basic Operator Panel) and no RS-485 interface are included, so commissioning requires an external operator panel or a PC connection.
The 200-240 V 1 AC input with +10/-10% tolerance and 47-63 Hz covers standard single-phase mains globally. The 0.12 kW CT/VT rating tells you the drive is matched to a 0.12 kW motor frame — oversizing is not needed here. The 150% overload for 60 seconds is the CT curve: it handles momentary load spikes without tripping, typical for a small auger or fan start. IP20 means no washdown rating; keep it in a ventilated enclosure away from dust and moisture. Ambient temperature range -10 to +50 °C covers most indoor plant floors but derate above 40 °C per the thermal curve.