The Siemens 6SL3211-0AB12-5BB1 is a SINAMICS G110-CPM110 AC drive rated 0.25 kW for both constant-torque (CT) and variable-torque (VT) loads. It runs on a 200-240 V 1 AC supply, ±10%, 47-63 Hz. The 150% CT overload for 60 seconds means it can handle short-duration peak loads — like a sticky conveyor start or a pump breakaway torque — without tripping. Communication is via RS-485 using the USS protocol. No analog input on this variant, so speed reference comes over the serial link or via the BOP (not included). The IP20 enclosure is for clean, dry panel mounting — not for washdown or outdoor use. Ambient temperature range is -10 to +50 °C, which covers most unventilated cabinet conditions. Dimensions are 150 x 90 x 116 mm (HxWxD).
Mounts in a standard control cabinet on a DIN rail or screw panel. The integrated filter B handles conducted emissions on the 200-240 V 1 AC line, so no external EMC filter is needed for that supply. Keep the RS-485 cable shielded and grounded at one end — noise from the drive's IGBT switching can couple into unshielded runs.