The Siemens 6SL3211-0AB21-5AA0 is a SINAMICS G110 CPM110 AC drive sized for a 1.5 kW motor on single-phase 200-240 VAC input, variable torque (VT) and constant torque (CT) rated at the same 1.5 kW. The built-in Class A EMC filter covers conducted emissions for European domestic/commercial environments — no external filter needed for basic compliance. CT overload is 150% for 60 seconds, which handles conveyor start or pump breakaway without tripping. IP20 means it lives in a clean, dry enclosure; no washdown or dust tolerance.
Lifecycle stage is mature, meaning this drive is in steady production — no imminent EOL, but not a new-design target either. It's a known quantity for BOM lines that need a single-phase input drive at 1.5 kW.
Integration note
Mounts in a standard cabinet on its backplate or DIN rail adapter. Dimensions 160 x 140 x 142 mm (HxWxD) — check gland plate clearance for the incoming mains and motor cable. No BOP (Basic Operator Panel) included, so commissioning requires the optional BOP or a PC connection via the USS port (the RS485 interface is absent on this variant; the analog input is the primary control signal). Ambient temp range -10 to +40 °C; derate above that.