Drive specs and what they mean for fit
The Siemens 6SL3211-0AB22-2AA0 is a SINAMICS G110 CPM110 AC drive rated 2.2 kW for both constant torque (CT) and variable torque (VT) loads, fed from a single-phase 200-240 VAC supply at 47-63 Hz. The built-in Class A EMC filter means it meets conducted emissions limits for industrial environments without an external filter module — saves a DIN-rail slot and wiring time. CT overload capability is 150% for 60 seconds, which covers the typical starting and short-term peak demand of a conveyor or pump motor without oversizing the drive frame. The IP20 enclosure suits clean, indoor panel mounting — no washdown or dust protection, so keep it inside a cabinet. Ambient range is -10 to +50 °C; above 40 °C you'll want to check the derating curve if running continuous full load. No operator panel (BOP) and no RS-485 interface on this variant, so commissioning is via the analog input or a separate communication module.