Drive selection memo
The 6SL3211-0KB13-7BB0 is a SINAMICS G110 CPM110 AC drive rated 0.37 kW constant torque and 0.37 kW variable torque, fed from a single-phase 200-240 VAC supply at 47-63 Hz. Built-in Class B EMC filter means it meets conducted emission limits for residential and light industrial environments without an external filter — one less component to panel-mount. The RS485 interface runs the USS protocol, so it talks to Siemens PLCs and HMIs natively; no gateway needed for point-to-point or simple multi-drop links. Constant-torque overload is 150% for 60 seconds, which covers pump and fan starting torque and brief conveyor jams. Ambient range -10 to +50 °C without the optional BOP (Basic Operator Panel) fitted; if you add the BOP for local control, the drive still runs in that range but the BOP display may lag at the low end. IP20 means it belongs in a clean, dry cabinet — no washdown, no dust.
Panel integration notes
Footprint is 150 mm high, 90 mm wide, 101 mm deep — no heatsink extension. Mounts on backplate or DIN rail via integral clip; leave clearance above and below for airflow.