The 6SL3211-1PE18-0UL0 is a SINAMICS G120 PM240-2 power module in the FSA frame size, rated for 3AC 380-480V +10/-10% at 47-63Hz input. It delivers 2.2 kW under high overload (HO) duty — 200% for 3s, 150% for 57s, 100% for 240s — with ambient up to +50°C. Under low overload (LO) it delivers 3 kW at 150% for 3s, 110% for 57s, 100% for 240s, ambient limited to +40°C. That HO rating governs the real selection: it matches a 2.2 kW induction motor on a conveyor or pump where the load profile demands short bursts of torque without tripping the drive. Built-in braking chopper means you can add an external resistor for vertical loads or rapid deceleration — no separate chopper module needed. No line filter on this variant; the push-through mounting style lets the heatsink protrude through the panel cutout, keeping the electronics inside the enclosure while the fin stack dissipates heat outside. That saves DIN-rail space inside the panel and improves thermal headroom.
Panel integration — FSA footprint and IP20
FSA frame dimensions are 238 x 126 x 171 mm (HxWxD). The push-through design requires a cutout in the backplate for the heatsink; the module then screws to the panel. Ambient derating applies: the HO rating holds to +50°C, LO rating to +40°C; above those, reduce output current per the thermal curve.