The Siemens 6SL3211-2AB13-7LA1 is a SINAMICS G110-CPM110 AC Drive listed as a spare part, sized for 0.37 kW constant torque (CT) and 0.37 kW variable torque (VT) loads. It runs on 200-240 V 1 AC input at 47-63 Hz, with a CT overload capability of 150% for 60 seconds. The drive is unfiltered, rated IP20, and ships without a BOP (Basic Operator Panel) or RS-485 interface — it's a bare unit for panel integration where those features are already covered by the system.
The drive measures 150 x 90 x 116 mm (HxWxD) and carries an IP20 degree of protection — it's designed for installation inside a control cabinet or enclosure, not for washdown or outdoor deployment. Ambient temperature range is -10 to +50 °C, so it handles standard industrial environments without derating at the lower end. The unfiltered variant means it lacks an integrated EMC line filter; if your installation requires conducted-emission suppression per EN 61800-3 Category C2 or C3, an external filter will be needed between the line supply and the drive input.
This is a single-phase input drive (200-240 V 1 AC) with an analog input for speed reference. No BOP means no local display or keypad — parameterization and control are handled via the analog input or a fieldbus interface (not included; no RS-485 on this variant). The VISCOUNT factory setting indicates it ships with a preloaded application macro for simple speed control, likely pump or fan duty based on the VT rating. For a commissioning engineer: expect to download parameters via the USS protocol or a PC adapter if you need to change the macro.