What this drive delivers — 30 kW at 200-240 V, with overload headroom
The 6SL3220-3YC34-0UF0 is a SINAMICS G120X drive rated for 30 kW output at 200-240 V 3-phase input, with a 110% overload capability for 60 seconds and 100% for 240 seconds — enough headroom to handle a pump starting against a closed discharge valve or a conveyor restarting under partial load. It accepts a wide input range of 200-240 V 3-phase AC +10/-20% at 47-63 Hz, so it sits comfortably on a 208 V or 230 V plant distribution without a step-up transformer. The ambient temperature envelope is -20 to +45 °C; above 45 °C you'll need to derate the output current per the G120X manual, but the 45 °C ceiling covers most non-conditioned machine rooms.
Fieldbus fit — PROFINET and Ethernet IP on board
PROFINET PN and Ethernet IP are integrated into the drive — no separate communication module needed, no extra slot consumed in the panel. The intelligent operator panel (IOP) is included, so you can commission the drive locally without a laptop: set the motor nameplate data, configure the fieldbus address, and run a guided start-up.
Mounting and physical integration — frame size FSE, IP20
Frame size FSE and IP20 / UL open type mean this drive mounts inside a clean, dry electrical enclosure — not on the machine frame exposed to washdown. Packaging dimensions are 395 x 610 x 425 mm — plan the shipping crate and the panel cut-out accordingly.
Compliance and documentation — RoHS, REACH, export controls
RoHS compliant since July 2006, with REACH Article 33 candidate-list information available on request from Siemens. Export control classification is AL:N / ECCN:N — no special license required for most commercial shipments.