The Siemens 6SL3223-0DE17-5AA1 is a SINAMICS G120P Power Module PM230 in an FSA frame size, built for pump and fan applications where variable torque drives the load curve. It carries an integrated Class A EMC filter, so it meets conducted emission limits without an external filter box — saves a DIN-rail slot and the wiring to it. The IP55 / UL Type 12 enclosure means it stands up to hose-down and dust in food, beverage, or water treatment environments; no separate cabinet required if the ambient stays within -10 to +40 °C for low overload duty.
Rated at 0.75 kW for low overload, the PM230 delivers 150 % current for 3 seconds, 110 % for 57 seconds, and 100 % continuously for 240 seconds. That overload curve is typical for variable-torque loads — a centrifugal pump or fan rarely needs sustained torque above nameplate, but it does need a short burst for breakaway or acceleration. The 380-480 V 3 AC input with +10/-10 % tolerance and 47-63 Hz range covers standard European and North American line supplies. No control unit is included; this module mates with a CU230P-2 Control Unit running firmware V4.3.2 or higher.
Listed lifecycle stage is mature, meaning Siemens continues production but the design is stable — no active phase-out notice on this order code. If a buyer is stocking spares for a line already running G120P drives, this is the direct match — no firmware or mechanical adaptation needed.
Dimensions are 460 x 154 x 249 mm (H x W x D) for the FSA frame. The IP55 enclosure allows wall-mounting in washdown zones without a secondary enclosure. Power and motor connections are on the bottom; the control interface is a slot on the front for the CU230P-2 Control Unit. The integrated Class A filter is internal — no external filter to mount or bond.