The Siemens 6SL3262-1AD00-0DA0 is a SINAMICS shield connection kit designed for Power Modules in frames FSD and FSE, covering the PM230, PM240, and PM250 series. It provides the hardware to terminate cable shields at the drive, maintaining EMC integrity in the cabinet. This is a mechanical accessory — not a board-level component — so there is no pinout or electrical rating to match. The fit is determined entirely by the drive frame size (FSD or FSE) and the Power Module type.
The lifecycle stage for this order code is listed as mature. That means it is not in active new-product introduction, but it remains in the current portfolio and is not announced for discontinuation. No successor order code has been published. The most recent revision of the associated documentation carries a date of 09.03.2021, with the standard Siemens change-reservation notice. This confirms the part has been stable for several years and no recent design change has triggered a new order code.
Installation context
The shield connection kit mounts inside the drive cabinet, directly on the Power Module. It provides the clamping and grounding points for motor-cable and encoder-cable shields, which is the critical step for passing EMC emissions limits and keeping common-mode currents off the signal wiring.