Skip to main content
Siemens 6SL5120-1UE23-0AD0 — Servo Drives

Siemens 6SL5120-1UE23-0AD0 Servo Drive, 15 kW, 30 A

MPN6SL5120-1UE23-0AD0
Active

Siemens 6SL5120-1UE23-0AD0 SINAMICS S220 Single Motor Module, booksize D-type, input 495-720 V DC, output 0-480 V 3AC, 30 A, 15 kW, IP20 internal air cooling, FW V5.2 SP3 HF10 or later.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

6SL5120-1UE23-0AD0 — Identification
ParameterValue
Product familySingle Motor Modules in booksize format
6SL5120-1UE23-0AD0 — Compliance
ParameterValue
RoHS complianceSince: 04-09-17
REACH SVHC declarationLead CAS-No. 7439-92-1 > 0,1 % (w / w)
Export control (ECCN)AL : N / ECCN : 3A999A
6SL5120-1UE23-0AD0 — Other specifications
ParameterValue
Group codeR220
Product groupX0HX
Product classA: Standard product which is a stock item could be returned within the returns guidelines/period.

Product details

What the module is and where it sits

The Siemens 6SL5120-1UE23-0AD0 is a SINAMICS S220 Single Motor Module in booksize format, sized for a single axis and bolted into the SINAMICS S220 line-up alongside a Line Module that supplies the DC link. It is the inverter slice between the common DC bus and the motor — the Line Module rectifies and regulates, this module chops and switches — which is why every rating on its face is the output side, not the line side.

Ratings that drive the panel sizing

DC-link input spans 495-720 V DC, so the upstream Line Module must hold the bus inside that window under all load and regen conditions or the module will not close its precharge. Firmware floor is FW V5.2 SP3 HF10: commissioning tools, parameter sets, and safety integration are gated to that version, so pairing an older controller or starter commissioning tool with this slice is a known way to lock out parameters at first power-up.

Cabinet envelope and cooling

Booksize D-type chassis with IP20 and internal air cooling only — no cold plate, no liquid loop. The packaging footprint is 365.00 x 565.00 x 110.00 mm, so DIN-rail or backplate layout must clear that envelope plus the bend radius for the DC-link bus bars and the motor cable gland on the underside. Provided the cabinet's forced-air scheme moves enough CFM across the heatsink fins at the rated ambient, the module holds current; in a sealed enclosure, derating kicks in well before the 30 A nameplate figure.

Compliance posture on the BOM

Export-control classification is ECCN 3A999A, so export shipments need the standard ECCN paperwork on file. The internal line codes on the Siemens record are Product Group X0HX and Group Code R220, with the part flagged Product class A (standard stock item, returnable per the standard returns window). These are ordering-line references, not functional specs.

Lifecycle and ordering

The FW V5.2 SP3 HF10 floor is worth flagging to the controls engineer before the cabinet goes to the floor, provided the wider drive lineup is on a compatible firmware baseline.

Frequently asked questions

What compliance documentation does Siemens provide for 6SL5120-1UE23-0AD0 (RoHS, REACH, UL, IEC)?

The REACH Art. 33 disclosure is logged against Lead (CAS-No. 7439-92-1) above 0.1% w/w. Export-control classification is ECCN 3A999A. UL/IEC markings were not part of the supplied evidence and should be pulled from the Siemens product documentation pack if required for the end-customer declaration.

What is 6SL5120-1UE23-0AD0's listed Group Code on this Servo Drives line?

The Group Code is R220, with Product Group X0HX on the same line. Both are internal Siemens ordering references rather than functional ratings.

MPN
6SL5120-1UE23-0AD0