SINAMICS S220 booksize module — 30 kW / 60 A in a 110 mm slot
The Siemens 6SL5120-1UE26-0AC0 is a single motor module from the SINAMICS S220 booksize family, accepting 495–720 V DC on the DC-link input and delivering 0–480 V 3AC at 60 A to a single servo axis — the headline 30 kW rating is the mechanical shaft output, not the electrical input, and a 30 kW continuous axis typically maps to a frame size in the 60–80 A output class. The unit ships in booksize C form factor with internal air cooling only (no cold-plate or liquid option), carries an IP20 enclosure rating for cabinet mounting, and is qualified for firmware FW V5.2 SP3 HF10 or later — meaning an existing S220 line that still runs an older firmware branch needs the controller upgraded before this module drops into the rack.
Compliance posture — RoHS since 04-09-17, REACH Art. 33 declared
Siemens declares compliance with the RoHS substance restrictions for this part since 04-09-17, which means the BOM is in line with Directive 2011/65/EU as applied to industrial motor modules — a supplier-quality sign-off can be closed against the manufacturer's declaration without additional test data on restricted substances. REACH Art. 33 duty to inform is triggered: lead (CAS-No. 7439-92-1) is present above the 0.1 % (w/w) threshold and must be communicated down the supply chain per ECHA's candidate-list requirement — this is a typical disclosure for power-electronics modules with lead-bearing solder alloys, not a non-conformance flag, but the declaration has to travel with the part to the end customer. Export-control classification is AL:N / ECCN:3A999A — a low-friction export category that does not require a specific licence for most destinations, which simplifies cross-border shipments from independent distributors into EU, US and APAC panel builders.
Panel integration — where the booksize C slot lives
The booksize C footprint occupies a defined slot width in the S220 line-up and mounts inside a standard 600 mm-class control cabinet; the 365 × 565 × 110 mm packaging dimension sets the cabinet-depth allowance for the crate, not the installed module — once unpacked, the unit is sized to drop into the rack alongside the infeed and adjacent axis modules. IP20 with internal air cooling means the cabinet must dissipate the module's heat load through forced ventilation or a properly sized heat exchanger — closed-cabinet deployment above the rated ambient requires the cabinet builder to budget airflow, not just panel space.