132 A output, 75 kW — what the headline rating decides
The Siemens 6SL5120-1UE31-3AC0 is a SINAMICS S220 Single Motor Module in booksize C frame, sized for 132 A continuous output at 480 V 3AC, which lands at 75 kW of rated shaft power — the figure a panel builder uses to pick the line-side fuse and the motor cable cross-section. Input is the 495-720 V DC link from the SINAMICS S220 active line module, not a mains feed; the motor module sits downstream of the rectifier and only sees DC bus voltage, so any replacement has to be a booksize-format Single Motor Module, not a stand-alone drive.
Booksize C footprint, IP20 internal air cooling only
Internal air cooling keeps the heat path inside the cabinet — the module depends on the enclosure's airflow and filter maintenance to hold its continuous current, and the IP20 rating means the cabinet has to carry the sealing, not the drive.
Firmware gating and the commissioning slot
The unit is only valid from firmware V5.2 SP3 HF10 onward, which means a replacement module pulled from a different line with an older FW image will not be accepted by the S220 control until the firmware is loaded and the topology is re-acknowledged — the commissioning engineer has to plan the FW slot, not just the hardware swap.
Compliance pack on the nameplate
RoHS compliance is declared since 02-09-19, REACH Art. 33 carries a lead CAS-No. 7439-92-1 disclosure above 0.1% w/w, and the export-control classification is ECCN 3A999A / AL:N — the paper trail a customs broker or audit will ask for is on file with the lot, not invented at shipping.
Active lifecycle, Group Code R220 — sourcing reality
The lifecycle record reads Active, and the Group Code R220 / Product Group X0HX ordering keys are stable — the part is not on a phase-out track, so a line-down spare is a same-format swap rather than a redesign, and the order goes in under the same codes the storeroom already knows.