1.5 kW SINAMICS S210 single-axis servo converter, 200–480 V 3AC
The Siemens 6SL5310-1BE11-5DF1 is a SINAMICS S210 single-axis servo converter (cited as the (6SL5...) family in the product record) sized for a 1.5 kW motor in a frame size B enclosure 70 x 322 x 223 mm — the compact B width is what makes it fit alongside a matching S210 line filter and line reactor inside standard panel cut-outs. Input is 200-480 V three-phase at 6.0 A with a 45-66 Hz window, so a single converter covers 200 V, 230 V, 400 V and 480 V plant mains without re-spec — useful on multi-region builds where the same panel ships into EU 400 V and US 480 V sites. Output is 0 V input to 5.0 A over 0-550 Hz, the band a 1.5 kW SERVO motor actually needs for high-dynamic positioning rather than continuous low-speed holding.
Frame size B integration and I/O layout
Frame size B at 70 x 322 x 223 mm (W x H x D) is the SINAMICS S210 small-footprint tier; the converter ships in single-piece packaging (345 x 400 x 80 mm) so one unit replaces one controller slot in the build-of-material. IP20 rated, this is a cabinet-internal device — not a sealed unit — and pairs with a separately ordered line filter and line reactor when the EMC/grounding plan calls for them; that separation also makes the SINAMICS S210 safety-channel assignment clean, since the safety wiring is not bundled with the line-side filter harness.
Compliance trail: RoHS, REACH, export classification
RoHS substance-restriction compliance is recorded since 31-08-23, and REACH Article 33 carries the disclosure that lead (CAS 7439-92-1) exceeds 0.1 % (w/w) — a declaration-pack note for any finished-goods shipment into the EU market. Export control is logged as AL: N / ECCN: 9N9999, the lowest-friction classification for cross-border shipment of a finished industrial drive — no export licence gate on routine PO movement. Siemens records the product as Active / current, and the customer-facing product class flag is B — return-restricted, channel it through your Siemens partner rather than treating it as freely returnable.
Sourcing posture for contract builds
For multi-client contract lines, the same 6SL5310-1BE11-5DF1 sits on the BOM with the original Siemens vendor record: Group Code R220 and Product Group 4R30 are the identifiers to quote against if the end-client's AML reads Siemens-native rather than an alternate-make spelling. Lead-time and volume price breaks are set at quote time — sourced per RFQ through independent distribution with manufacturer trace, no claimed immediacy on the page, since the converter is built to Siemens order codes and the customer's approved-vendor list governs which channel is acceptable for the build.