What 6SL5510-1BB10-2AF0 is and where it drops in
The 6SL5510-1BB10-2AF0 is a SINAMICS S200 servo converter in the FSA frame, sized for 0.2 kW motors with a 200-240 V 1-phase or 3-phase input (tolerance -15% / +10%) and an output stage rated 0-input 1.33 A across 0-550 Hz. The PROFINET variant lands on the network slice of the machine — typical fit is a small indexing axis, a feeder conveyor drive, or a lightweight pick-and-place servo where the cabinet footprint matters more than the continuous current ceiling. Frame dimensions 40 x 170 x 135 mm (W x H x D) in IP20 — the converter is built for a sealed control cabinet, not a wet-end panel, so the integrator plans the gland plate and clearance around the heat sink rather than around the housing seal.
Why the 1.33 A / 0.2 kW rating is the sizing decision
The headline 0-inpu 1.33 A output figure is what governs motor pairing — anything above that continuous current moves the integrator to the next S200 frame. Input current at 240 V is 2 A single-phase or 1.1 A three-phase, so the branch protection and wire gauge upstream are set by the input figure, not the output. 50/60 Hz line input with output frequency up to 550 Hz gives the headroom for high-speed spindle and small servo applications without forcing a step up to a larger VFD frame.
Compliance paperwork the buyer will be asked for
REACH Art. 33 disclosure lists lead (CAS-No. 7439-92-1) at greater than 0.1 % w/w — the buyer should expect that substance declaration to travel with the shipment for any EU-bound delivery.
Lifecycle and sourcing posture
Lifecycle status is Active — the code sits in the current SINAMICS S200 production line. Group Code R220 and Product Group X0H5 are the Siemens-internal ordering fields that the buyer's PO line needs to mirror for clean receipt into a Siemens vendor-master. Product class A means a standard stock item that moves under the standard returns window.